1. Familiar with drawings.

　　不用说，尤其是结构图必须非常熟悉，如果结构图没有表示出来，也指大图、剖面图，或者与结构图结合。

　　Needless to say, structural drawings in particular must be very familiar. If they are not expressed, they also refer to large drawings, section drawings, or combination with structural drawings.

　　2、阅读结构说明。

　　2. Reading structure description.

　　为什么后说熟悉图纸，还要把结构解释出来呢?由于结构描述中包含了大量的信息，在结构方案中没有涉及，很多细节都体现在结构描述中，如杆的一些措施，吊杆的基础梁等，所以结构描述必须阅读。

　　Why do we need to explain the structure when we are familiar with the drawings? Because the structural description contains a lot of information, which is not involved in the structural scheme, many details are reflected in the structural description, such as some measures of the pole, the foundation beam of the suspender, etc., so the structural description must be read.

　　3.定义项目中使用的规范和版本。

　　3. Define the specifications and versions used in the project.

　　在结构的施工说明中会有规范和规范版本的施工依据，如果没有新的版本必须在图纸审核中提出，明确施工依据版本。

　　In the construction instructions of the structure, there will be the construction basis of the standard and the standard version. If there is no latest version, it must be put forward in the drawings review, and the construction basis version should be clearly defined.

　　4. 熟悉图纸评审。

　　4. Familiar with drawing review.

　　联合审查图纸必须特别熟悉,因为联合审查图纸涉及到很多不同的图纸,图纸或没有明确的内容,相关内容在钢筋样本将应当依据的共同审查图纸,图纸。

　　Joint review drawings must be particularly familiar with, because the joint review drawings involve many different drawings, drawings or no clear content, the relevant content in the steel bar samples should be based on the joint review drawings, drawings.

　　5. 做一个列表。

　　5. Make a list.

　　包括:高度、混凝土标号、所用钢筋类型及相应的锚固长度，搭接长度的内容制成一张粘贴在突出位置的清单，以便当钢筋试样容易找到时，节省时间。

　　Including: height, concrete label, type of steel bar used and corresponding anchorage length, overlap length of the content of a list pasted in the prominent position, so as to save time when the steel bar sample is easy to find.

　　6、小心，再小心

　　6. Be careful, be more careful

　　钢筋试样车削是一项需要耐心和细心的工作。毕竟在施工现场发现了一些错误，钢筋切板的错误是不容易发现的。因此，为了避免给自己增加工作量，在打样的过程中，我必须有足够的耐心和细心的态度。

　　Turning steel bar specimens requires patience and care. After all, some errors were found in the construction site, and it is not easy to find the errors of steel plate cutting. Therefore, in order to avoid increasing the workload for myself, in the process of proofing, I must have enough patience and careful attitude.