螺纹钢筋长度大家知道是多少吗？说到这个螺纹钢筋的长度，她跟盘螺还不一样，这可不是说你想多长就有多长的，他也是有规定的。
Do you know the length of the rebar? Speaking of the length of the rebar, she is not the same as the screw. This does not mean that you can have as long as you want. He also has rules.
螺纹钢筋长度
Length of Threaded Reinforcement Bar
钢筋通常按定尺长度交货，具体交货长度应在合同中注明，螺纹钢筋长度上市场流通多的是12米和9米。
Steel bars are usually delivered according to fixed length. The specific length of delivery should be specified in the contract. The length of threaded steel bars circulates in the market up to 12 meters and 9 meters.
钢筋可以盘卷交货，每盘应是一条钢筋，即只有两个钢筋头，允许每批有5%的盘数（不足两盘时可有两盘）由两条钢筋组成。其盘重和盘径由供需双方协商确定。
Steel bars can be delivered in coils, each plate should be a steel bar, that is, only two steel head, allowing 5% of the number of plates per batch (less than two plates can be made up of two steel bars). Its weight and diameter shall be determined through consultation between the supplier and the demander.
长度允许偏差：钢筋按定尺交货时的长度允许偏差为0~+50mm，允许按双方协议或合同交货。
Length allowable deviation: The allowable deviation of the length of reinforcing steel bar is 0 ~+50mm when it is delivered according to the fixed length, and the allowable deviation is 0 ~+50mm when the reinforcing steel bar is delivered according to the agreement or contract between the two parties.
弯曲度和端部：钢筋端部应剪切正直，局部变形应补影响使用。
Bending degree and end: The end of reinforcing bar should be sheared and straight, and the local deformation should compensate for the influence of use.
重量及允许偏差：钢筋可按理论重量交货，也可按实际重量交货。按理论重量交货时，理论重量为0.00617*d*d*L，其中d为钢筋的直径，L为钢筋的长度。
Weight and allowable deviation: steel bars can be delivered according to theoretical weight or actual weight. When delivered by theoretical weight, the theoretical weight is 0.00617*d*d*L, where D is the diameter of steel bar and L is the length of steel bar.
If you want to know more about steel, such as the length of threaded steel bar, pay attention to us. Jinan wholesale steel bar will, as always, bring you more steel knowledge; http://www.jzqgc.com/
咨询热线： 13605413762
