当前位置: 首页 > 新闻资讯 > 行业动态 正文

钢筋网片在运输过程中有哪些要注意的?

添加时间:2019-07-15      发布人:http://www.jzqgc.com

  经验丰富的钢筋网片运输应该都知道整个过程运输是非常困难的,在这个过程中可能会遇到许多问题,如果你仍然不知道钢筋网片什么交通不是非常简单的话说,他跟着小编一起看以下内容,相信能有一些收获。
  Experienced steel mesh transportation should know that the whole process of transportation is very difficult, in this process may encounter many problems, if you still do not know what the steel mesh traffic is not very simple, then he followed Xiaobian to see the following content, I believe there will be some gains.
  建筑行业中很多产品的形状比较大,运输比较,包括大量的原材料、设备以及必不可少的钢筋网等建筑材料。钢网由于其自身的因素如钢丝直径比一般施工网要粗得多,形状较大等原输送方面都很麻烦。
  In the construction industry, many products are relatively large in shape and rarely transported, including a large number of raw materials, equipment and essential construction materials such as steel mesh. Because of its own factors, such as the diameter of steel wire is much thicker than the general construction network, the shape of the original transmission is very troublesome.
  钢网的形状可长6米,宽3米,极大地方便了用户的施工质量和效率。然而,它的巨大重量使运输卡车非常麻烦,这往往延误建设。这里,施工时请注意运输负担。使网格尽可能小。
  The shape of steel mesh can be 6 meters long and 3 meters wide, which greatly facilitates the construction quality and efficiency of users. However, its huge weight makes transport trucks very troublesome, which often delays construction. Here, please pay attention to the transportation burden during construction. Make the grid as small as possible.
  发货前对钢筋网片进行一次又一次的清点,然后用钢丝形成牢固的桩,有利于搬运和防止板材脱落,避免不必要的网片表面磨损和弯曲。薄金属丝网的边缘应密封泥浆天鹅绒绳子和塑料包装带anti-pressure电影边缘,以避免脱落的钢丝网的边缘和确保的平面网格和原始表面的颜色。
济南钢筋批发
  Before shipment, check the reinforcing steel mesh again and again, and then use steel wire to form a solid pile, which is conducive to handling and preventing the sheet from falling off, avoiding unnecessary mesh surface wear and bending. The edges of the thin wire mesh should be sealed with mud velvet rope and plastic wrapping tape with anti-press film edges to avoid falling off the edges of the wire mesh and ensure the color of the flat mesh and the original surface.
  网格的四角用铁丝牢固的填充,减少了所占空间的立方,节约了车内的整体空间,间接降低了运输成本。薄型丝织品可以用一定立方单位的木箱包装,以防止网面被挤压。钢筋网件到达卸料过程中也应严格注意轻轻移动,以免损坏钢筋网件。
  The four corners of the grid are firmly filled with iron wire, which reduces the cubic space occupied, saves the overall space in the car, and indirectly reduces the transportation cost. Thin silk fabrics can be packed in wooden boxes of certain cubic units to prevent the mesh from being extruded. In order to avoid damaging the steel mesh, the steel mesh should be moved gently when it arrives at the unloading process.
  这些都是钢网运输过程中比较困难的零件,但只要你注意这些方面并尽量避免,就不会影响到一般。
  These are difficult parts in the process of steel transportation, but as long as you pay attention to these aspects and try to avoid them, it will not affect the general.
  济南钢筋批发的相关信息可以点击官网进行咨询:http://www.jzqgc.com/
  Jinan reinforcing steel wholesale information can be consulted by clicking on the official website: http://www.jzqgc.com/
上一条: 钢筋网和钢丝网的区别是什么?
下一条: 钢筋在假山的制作中起到什么样的作用?
咨询热线: 13605413762