The production and installation of steel mesh confirm these data. Reinforcing mesh is a kind of reinforcing mesh that arranges the longitudinal and transverse reinforcing bars according to a certain distance and angle, and all welding points are welded together.

　　1. 带钢的厚度误差是常见的钢铁生产,这个误差范围很难控制在生产工程中,主要是因为的过程,磨料磨具的磨损(基本类型的组件失败),导致钢的错误,这是不容易控制,但是在这个0。25毫米的射程是可以控制的，超过这个范围就会引起怀疑。

　　1. The thickness error of strip steel is a common steel production, and this error range is difficult to control in production engineering, mainly because the final process, abrasive wear (basic type of component failure), leads to steel errors, which is not easy to control, but in this 0. A range of 25 mm is controllable, beyond which doubt arises.

　　2. 钢筋网适用于工厂生产，用冷轧带肋钢或冷轧圆钢焊接而成，是一种良好、的混凝土配合比材料。钢(英语:钢筋)净形状大小5毫米,误差范围是原板在切割过程中,如果做了,在错误不会影响钢结构的安装铺设,如果大于错误,可能空间,或者不能购物,但是我们公司,经过多年的经验,基本已经控制误差范围在1 - 2毫米。

　　2. The steel mesh is suitable for factory production and welded with cold-rolled ribbed steel or cold-rolled round steel. It is a good and efficient concrete mix material. The net shape and size of steel (English: steel bar) are 5mm, and the error range is the original plate in the cutting process. If it is done, the error will not affect the installation and laying of steel structure. If it is larger than the error, it may be space, or it can not be purchased. However, our company, after years of experience, has basically controlled the error range of 1-2mm.

　　3.对角线误差:这种误差主要是由于制钢过程中，挤压，或塑料修理引起的热量不均造成的。

　　3. Diagonal error: this error is mainly caused by uneven heat caused by extrusion or plastic repair during steel making.

　　4,。钢网的平整度是由钢网焊机的压力焊接工艺引起的。安装固定后，钢网完全保持平整。另外，我公司采用大型钢筋网压焊机，马华钢、扁钢的平整度均小于0。5mm也是焊接质量(目标目标)的重要指标。

　　4, The flatness of the steel mesh is caused by the pressure welding process of the steel mesh welder. After installation and fixation, the steel mesh shall be completely flat. In addition, our company adopts large-scale steel mesh pressure welding machine, and the flatness of Mahua steel and flat steel is less than 0. 5mm is also an important index of welding quality (target).

　　上面的钢筋网标准是基于目前的钢网行业的生产力,以及材料的物理性质、安装条件,使用综合考虑钢网产品的配方,只要标准中的数据以满足误差范围能满足使用。热齿钢网类型:

　　The above steel mesh standard is based on the current productivity of the steel mesh industry, as well as the physical properties and installation conditions of materials. The formula of steel mesh products is comprehensively considered, as long as the data in the standard can meet the error range. Type of hot tooth steel mesh:

　　，经过普通扁钢的承载槽、扁钢的单杠压缩锁紧成形。钢筋网适用于工厂生产，用冷轧带肋钢或冷轧圆钢焊接而成，是一种良好、的混凝土配合比材料。普通型热网格的喷嘴高度为100mm，热网格的长度一般小于2000mm。

　　First of all, the bearing groove of ordinary flat steel and the horizontal bar of flat steel are compressed and locked. The steel mesh is suitable for factory production and welded with cold-rolled ribbed steel or cold-rolled round steel. It is a good and efficient concrete mix material. The nozzle height of ordinary hot grid is 100mm, and the length of hot grid is generally less than 2000mm.

　　二世。整体轴承扁钢与棒材扁钢具有相同的高度，切削深度为轴承扁钢的一半。热齿钢网高度不得大于100mm。热齿钢网的长度一般小于2000mm。

　　II. The overall bearing flat steel has the same height as the bar flat steel, and the cutting depth is half of the bearing flat steel. The height of hot tooth steel mesh shall not be greater than 100mm. The length of hot tooth steel mesh is generally less than 2000mm.

　　遮阳承重扁钢开30度或45度溜槽，槽干扁钢锁槽成型。根据不同的需要可选用其它间距、规格的热钢筋(钢筋)网，可选用普通碳钢、不锈钢、mate等材料。热钢网高度小于100mm

　　The sun shading bearing flat steel shall be provided with 30 degree or 45 degree chute, and the groove dry flat steel lock groove shall be formed. According to different needs, other spacing and specifications of hot steel (reinforcement) mesh can be selected, and ordinary carbon steel, stainless steel, mate and other materials can be selected. Height of hot steel mesh is less than 100mm

　　四、重型热轧钢网由高扁钢和扁钢相互咬合，在1200吨的压力下压缩成型。适用于大跨度承载场合。

　　4、 The heavy-duty hot-rolled steel mesh is made of high flat steel and flat steel which are interlocked with each other and compressed under the pressure of 1200 tons. It is suitable for large-span bearing occasions.