1、建筑网片防腐浸渍槽其工作原理。
1. The working principle of anticorrosive impregnating tank for building mesh.
2、槽体为长条状容器,内装防腐剂;槽中设置有搅拌器。
2. The tank body is a long strip container with preservative in it; the tank is equipped with an agitator.
3、搅拌器可以在槽内左右移动,把防腐剂搅拌均匀,以保证浸渍质量的稳定。搅拌器的移动靠电机5通过链条6带动。
3. The agitator can move left and right in the tank to mix the preservative evenly to ensure the stability of the impregnation quality. The movement of the agitator is driven by the motor 5 through the chain 6.
由于防腐剂是悬浮液,必须依靠搅拌机了维持槽内防腐剂的均匀,否则将影响防腐涂层效果。
As the preservative is a suspension, it must rely on the mixer to maintain the uniformity of the preservative in the tank, otherwise it will affect the effect of the anticorrosive coating.
4、建筑网片烘干机,用蒸气作为加热介质,蒸气通过散热器对箱内网片进行加热。每箱可装入十几组钢筋网片,建筑网片从入口装入,放在传动链条上,每装入一组钢筋网片链条就移动一次,经过一定时间的移动烘干,烘干完毕的网片由出口吊出。
4. The building mesh dryer uses steam as the heating medium, and the steam heats the mesh in the box through the radiator. Each box can be loaded with more than ten groups of steel mesh. The construction mesh is loaded from the entrance and placed on the transmission chain. Each group of steel mesh chain is moved once. After a certain time of moving and drying, the dried mesh is lifted out from the exit.
5、自动防腐烘干生产线是一个两层的钢框架。钢筋网片用钢钎、钢梁、组装框架组成一组。用吊车吊下层行走组装网片小车,小车在下层轨道上移动,移动是用轨道旁的液压缸带动。
5. The automatic anti-corrosion drying production line is a two-layer steel frame. The steel mesh is composed of steel drill rod, steel beam and assembly frame. Hoist the trolley to the lower layer and assemble the mesh trolley. The trolley moves on the lower rail. The movement is driven by the hydraulic cylinder beside the rail.
当移可升降的台架处时,台架下降,使钢筋浸入浸渍槽内,然后台架上升,并振动片刻,使多余的防腐剂滴入槽中;小车继续前进,进入热风箱内进行烘干。
When it is moved to the lifting platform, the platform will be lowered so that the reinforcement will be immersed in the immersion tank, then the platform will be raised and vibrated for a moment, so that the excess preservative will drop into the tank; the car will continue to move forward and enter the hot air box for drying.
烘干后的网片再进入第二个浸渍槽中进行第二次浸渍烘干,然后提升架升上层轨道返回,再进入烘干箱内进行二次烘干,完成防腐工作。
The dried mesh enters the second soaking tank for the second soaking and drying, then the lifting frame rises to the upper track and returns, then enters the drying box for the second drying, and finally completes the anti-corrosion work.
烘干的建筑网片由天车吊起将网片组放入模具中。这条网片防腐生产加工线,每6分钟完成一组网片的防腐加工,产量很高。
The dried construction mesh is hoisted by the crown block to put the mesh group into the mold. This anti-corrosion production and processing line completes the anti-corrosion processing of one network piece every 6 minutes, with high output.