Nowadays, steel mesh is more and more widely used. Here is a brief introduction to the difference between steel mesh and steel bone:

　　1. 钢网是指在施工过程中直接吊起的预制或焊接的钢网(主要用于板或墙)。

　　1. Steel mesh refers to the prefabricated or welded steel mesh (mainly used for slab or wall) directly lifted during construction.

　　2. 钢骨也是预帮好，多在砖混结构中(构造柱、梁等)预帮系好，施工直接整个吊装属于钢骨吗?

　　2. Steel bone is also pre-stressed. It is usually pre-stressed in brick and concrete structures (structural columns, beams, etc.). Is the whole hoisting directly belong to steel bone?

　　3.强调钢筋是指钢网或钢骨架与现场:其间距之间的距离是指钢筋的同一行,行间距是指不同的钢筋行之间的距离,如:a。板轴承钢棒的行间距是指底下一行之间的距离酒吧和酒吧行(如果有的话)或负弯矩钢筋。b、柱上钢筋间距是指同侧钢筋之间的距离，柱上钢筋间距是指不同侧钢筋之间的距离。(列间距和行间距的确定任何一方应设置为参考,不同的参考而间距和行间距可以交换)c .梁钢筋间距平行于一行的水平面之间的距离主要加固钢筋钢行距行钢筋之间的距离不同,d.墙体应力的配筋间距与行间距确定等效的双层板筋架设，相同的竖向或水平钢筋配筋有助于扎入网中进行配筋，不同的网间距之间的距离是配筋之间的距离有助于扎筋吗?行间距?

　　3. It is emphasized that the reinforcement refers to the distance between the steel mesh or steel framework and the site: the distance between them refers to the same line of reinforcement, and the row spacing refers to the distance between different lines of reinforcement, such as: a. The row spacing of plate bearing steel bars refers to the distance between the lower row and the bar first row (if any) or negative moment steel bars. b. The distance between the bars on the column refers to the distance between the bars on the same side, while the distance between the bars on the column refers to the distance between the bars on different sides. (the determination of column spacing and row spacing shall be set as reference for either side, and the spacing and row spacing can be exchanged for different references) C. the distance between the beam reinforcement spacing and the horizontal plane parallel to a row is mainly the difference between the reinforced steel rows and the row reinforcement, d. The reinforcement spacing of the wall stress and the row spacing determine the equivalent double-layer slab reinforcement erection. The same vertical or horizontal reinforcement is helpful for the reinforcement in the mesh. Is the distance between different mesh spacing helpful for the reinforcement? Row spacing?

　　一个词:检验批检验应区分是由整体吊装事先帮助(填充钢网,钢框架),或该网站帮助先生(力增强填充),除了如实填写检验记录,也应检查间距和行间距是否符合要求,具体检验项目不限于钢筋安装检验批检查项目(但必须检查),形成一些规范相关的项目,还应检查(包括钢原材料检验批次检查表、钢网钢筋加工检验批次检查表、钢筋连接试验批次检查表和模板安装检验检查表上轴线位置、垂直度、保护层厚度等)。

　　One word: the inspection lot inspection should be distinguished from the overall lifting prior help (filling steel mesh, steel frame), or the website help Mr. (force enhancing filling). In addition to filling in the inspection record truthfully, it should also check whether the spacing and row spacing meet the requirements. The specific inspection items are not limited to the inspection items of the steel bar installation inspection lot (but must be checked), forming some specification related items, It shall also be checked (including inspection batch checklist of steel raw materials, inspection batch checklist of steel mesh reinforcement processing, inspection batch checklist of reinforcement connection test and inspection checklist of formwork installation for axis position, perpendicularity, thickness of protective layer, etc.).