The production and installation of steel mesh explain the rationality of these data. The reinforcement network is longitudinal reinforcement, and the transverse reinforcement is arranged in a certain distance to form a right angle, and all cross welded joints are welded together.

　　1. 带钢的厚度误差是常见的钢铁生产,这个误差范围是不容易控制在生产过程中,主要是因为过去的过程,和磨料磨损的工具(部分失败的一个基本类型),导致一个错误的钢铁,是不容易控制,但在这个0。25毫米的射程是可以控制的，超过这个范围就有故意的怀疑。

　　1. The thickness error of strip steel is a common steel production, and this error range is not easy to control in the production process, mainly because of the past process, and abrasive wear tools (a basic type of partial failure), resulting in a wrong steel, which is not easy to control, but in this 0. A range of 25 mm is controllable, beyond which there is deliberate suspicion.

　　2. 钢筋网片适用于工厂生产，由冷轧带肋钢筋或冷轧圆钢棒焊接而成的钢筋网片。是一种的混凝土面板材料。钢筋网外观尺寸5毫米,误差范围是原板在切割过程中,如果做了,在错误不会影响钢结构的安装铺设,如果大于错误,可能空间,或者不能购物,但是我们公司,经过多年的经验,基本已经控制误差范围在1 - 2毫米。

　　2. Steel mesh is suitable for factory production. It is welded by cold-rolled ribbed steel bar or cold-rolled round steel bar. It is a kind of high quality and efficient concrete panel material. The appearance size of the steel mesh is 5mm, and the error range is the original plate in the cutting process. If it is done, the error will not affect the installation and laying of the steel structure. If it is larger than the error, it may be space, or it can not be purchased. However, our company, after years of experience, has basically controlled the error range of 1-2mm.

　　3.对角线误差:这种误差主要是由于钢材生产过程中，挤压，或加热不均匀造成的塑料修补。

　　3. Diagonal error: this error is mainly caused by plastic repair caused by uneven extrusion or heating during steel production.

　　4. 钢筋网的平整度，由于钢筋网焊接机的压力焊接工艺，使钢筋网的安装可以完全平整。另外，我公司采用大型钢筋网压焊机，马钢、扁钢的平整度不超过0。5mm也是焊接质量的一个重要指标。

　　4. The flatness of the reinforcing mesh, due to the pressure welding process of the reinforcing mesh welding machine, makes the installation of the reinforcing mesh completely flat. In addition, our company adopts large-scale steel mesh pressure welding machine, and the flatness of Ma Steel and flat steel is not more than 0. 5mm is also an important index of welding quality.

　　上面的钢网标准基本上是钢丝网行业的现有生产力水平可以达到,及其物理性质的材料,安装条件,使用综合考虑钢网产品的开发,只要数据误差在标准范围能满足使用。热齿钢网类型:

　　The above steel mesh standard is basically that the existing productivity level of the steel mesh industry can be achieved, and its physical properties of materials, installation conditions, use comprehensive consideration of the development of steel mesh products, as long as the data error within the standard range can meet the use. Type of hot tooth steel mesh:

　　，在普通轴承扁钢槽沟切割后，形成单杠扁钢压力锁。钢筋网片适用于工厂生产，由冷轧带肋钢筋或冷轧圆钢棒焊接而成的钢筋网片。是一种的混凝土面板材料。喷嘴的加工高度为100mm，齿形热钢网的长度一般小于2000mm。

　　First of all, after the ordinary bearing flat steel groove is cut, a horizontal bar flat steel pressure lock is formed. The steel mesh is suitable for factory production. It is welded by cold-rolled ribbed steel bar or cold-rolled round steel bar. It is a kind of high quality and efficient concrete panel material. The machining height of the nozzle is 100mm, and the length of the toothed hot steel mesh is generally less than 2000mm.

　　二是整体轴承扁钢与单杠扁钢具有相同的高度，切削槽深度是轴承扁钢的一半。热齿钢网的高度不得大于100mm。热齿钢网的长度一般小于2000mm。

　　The second is that the whole bearing flat steel has the same height as the horizontal bar flat steel, and the cutting groove depth is half of the bearing flat steel. The height of hot tooth steel mesh shall not be greater than 100mm. The length of hot tooth steel mesh is generally less than 2000mm.

　　三、遮阳型承重扁钢开30度或45度溜槽，槽干扁钢压锁成型。可根据不同需要交其它间距、规格的热钢筋网，可采用普通碳钢、不锈钢、mate等材料。热钢筋网的高度小于100mm。

　　3、 The sun shading type bearing flat steel is provided with 30 degree or 45 degree chute, and the dry flat steel of the chute is pressed and locked. According to different needs, the hot steel mesh with other spacing and specifications can be made of ordinary carbon steel, stainless steel, mate and other materials. The height of hot mesh is less than 100mm.

　　4. 重型热筋网由高扁钢和单杠扁钢咬合而成，在1200吨的压力下成型。适用于大跨度荷载。

　　4. The heavy-duty hot bar mesh is made of high flat steel and horizontal bar flat steel, and is formed under the pressure of 1200 tons. It is suitable for long-span load.